Polyallylamine Hydrocloride (PAH)
DEPOSICIÓN DE NANORECUBRIMIENTOS MEDIANTE SPRAY CON LA TÉCNICA DE AUTOENSAMBLADO ELECTROSTÁTICO MONOCAPA (LAYER BY LAYER)

DEPOSICIÓN DE NANORECUBRIMIENTOS MEDIANTE SPRAY CON LA TÉCNICA DE AUTOENSAMBLADO ELECTROSTÁTICO MONOCAPA (LAYER BY LAYER)

UPNA Campus Iberus - Academica-e2013JOSE IGNACIO AINZUA CEMBORAINLink to source: https://academica-e.unavarra.es/handle/2454/6843Materias: Nanorecubrimientos; Deposición (Metalurgia); Autoensamblado electrostático monocapaIntroducción y objetivos Se va a realizar una...

Antibacterial Activity of Photocatalytic Metal Oxide Thin Films Deposited by Layer-by-Layer Self-Assembly

Antibacterial Activity of Photocatalytic Metal Oxide Thin Films Deposited by Layer-by-Layer Self-Assembly

Journal of Nanoscience and Nanotechnology2021RIVERO, PEDRO J.; ESPARZA, JOSEBA; SAN MARTIN, RICARDO; VITAS, ANA I.; FUENTES, GONZALO; GARCÍA, JOSE A.; RODRÍGUEZ, RAFAEL Abstract This paper reports the use of the Layer-by-Layer self-assembly (LbL) as an efficient...

Spectral width reduction in lossy mode resonance-based sensors by means of tapered optical fibre structures

Spectral width reduction in lossy mode resonance-based sensors by means of tapered optical fibre structures

Sensors and Actuators B: Chemical 2014A.B. SOCORRO; I. DEL VILLAR; J.M. CORRES; F.J. ARREGUI; I.R. MATIAS Abstract This contribution pursues the goal of achieving an optical fibre-based platform to detect anti-gliadin antibodies (AGAs), in order to early diagnose...

Sensitivity enhancement of a humidity sensor based on poly(sodium phosphate) and poly(allylamine hydrochloride)

Sensitivity enhancement of a humidity sensor based on poly(sodium phosphate) and poly(allylamine hydrochloride)

IEEE Sensors2013MIGUEL HERNAEZ; DIEGO LOPEZ-TORRES; CESAR ELOUSA; IGNACIO R. MATIAS; FRANCISCO J. ARREGUIAbstract The particular behavior of poly(sodium phosphate) (PSP) when it is deposited by means of the spraying layer-by-layer (LbL) technique has been used here to...

Enhancement of luminescence-based optical fiber oxygen sensors by tuning the distance between fluorophore layers

Enhancement of luminescence-based optical fiber oxygen sensors by tuning the distance between fluorophore layers

Sensors and Actuators B: Chemical2017NEREA DE ACHA; CÉSAR ELOSÚA; IGNACIO R. MATÍAS; FRANCISCO J. ARREGUI Highlights • The effect of the spacing between luminescent films of oxygen sensors was studied. • Fluorophore layers were spaced by different combinations of...

Recubrimiento de nanopartículas de oro en un sensor de fibra óptica

Recubrimiento de nanopartículas de oro en un sensor de fibra óptica

UPNA campus iberus2017ÍÑIGO OTAZU PALACIOSResumen La fibra óptica es una tecnología con cada vez más presencia ya que presenta la capacidad de dar buenos resultados en ámbitos muy dispares, tales como la biología, la medicina o la química. En este sentido, los...

Tunable optical fiber pH sensors based on TE and TM Lossy Mode Resonances (LMRs)

Tunable optical fiber pH sensors based on TE and TM Lossy Mode Resonances (LMRs)

Sensors and Actuators B: Chemical2016P. ZUBIATE; C.R. ZAMARREÑO; I. DEL VILLAR; I.R. MATÍAS; F.J. ARREGUI Abstract In this paper, a high sensitivity optical fiber pH sensor based on lossy mode resonance (LMR) generated with transversal electric (TE) and transversal...

Enzymatic Catalysis Combining the Breath Figures and Layer-byLayer Techniques: Toward the Design of Microreactors

Enzymatic Catalysis Combining the Breath Figures and Layer-byLayer Techniques: Toward the Design of Microreactors

ACS - APPLIED MATERIALS & INTERFACES2015A.S. DE LEÓN; T. GARNIER; L. JIERRY; F. BOULMEDAIS; A. MUÑOZ-BONILLA; J. RODRÍGUEZ-HERNÁNDEZ Abstract Herein, we report the fabrication of microstructured porous surfaces with controlled enzymatic activity by combining the...

Choose category