Wavelength shift
Sensitivity enhancement of a humidity sensor based on poly(sodium phosphate) and poly(allylamine hydrochloride)

Sensitivity enhancement of a humidity sensor based on poly(sodium phosphate) and poly(allylamine hydrochloride)

IEEE Sensors2013MIGUEL HERNAEZ; DIEGO LOPEZ-TORRES; CESAR ELOUSA; IGNACIO R. MATIAS; FRANCISCO J. ARREGUIAbstract The particular behavior of poly(sodium phosphate) (PSP) when it is deposited by means of the spraying layer-by-layer (LbL) technique has been used here to...

Lossy Mode Resonance-based pH sensor using a tapered single mode optical fiber coated with a polymeric nanostructure

Lossy Mode Resonance-based pH sensor using a tapered single mode optical fiber coated with a polymeric nanostructure

SENSORS, 2011 IEEE2011A.B. SOCORRO; I. DEL VILLAR; J.M. CORRES; F.J. ARREGUI; I.R. MATÍASABSTRACT This contribution presents a pH sensor based on the combination of two technologies: tapered standard-single mode optical fiber (S-SMF) and an electromagnetic resonance...

Single and Multiphase Flow Characterization by Means of an Optical Fiber Bragg Grating Grid

Single and Multiphase Flow Characterization by Means of an Optical Fiber Bragg Grating Grid

Journal of Lightwave Technology2015CARLOS R. ZAMARREÑO; CICERO MARTELLI; VIRGINIA H.V. BARONCINI; EDUARDO N. DOS SANTOS; MARCO J. DA SILVA; RIGOBERTO E.M. MORALES; PABLO ZUBIATE; FRANCISCO J. ARREGUI; IRGNACIO R. MATÍAS Abstract This study introduces a new approach to...

Sensitivity enhancement in a multimode interference-based SMS fibre structure coated with a thin-film: Theoretical and experimental study

Sensitivity enhancement in a multimode interference-based SMS fibre structure coated with a thin-film: Theoretical and experimental study

Sensors and Actuators B: Chemical2014A.B. SOCORRO; I. DEL VILLAR; J.M. CORRES; F.J. ARREGUI; R. MATÍAS Abstract Multimode interference in a single-mode–multimode–single-mode (SMS) fibre structure leads to the generation of transmission bands and attenuation bands in...

High sensitive refractometers based on lossy mode resonances (LMRs) supported by ITO coated D-shaped optical fibers

High sensitive refractometers based on lossy mode resonances (LMRs) supported by ITO coated D-shaped optical fibers

Optical Society of America2015P. ZUBIATE; C.R. ZAMARREÑO; I. DEL VILLAR; I.R. MATÍAS; F.J. ARREGUI Abstract Tin doped indium oxide (ITO) coatings fabricated onto D-shaped optical fibers are presented as the supporting medium for Lossy Mode Resonances (LMRs)...

Refractive index sensing performance of a Bragg grating built up on the tip of an optical fiber by reactive sputtering

Refractive index sensing performance of a Bragg grating built up on the tip of an optical fiber by reactive sputtering

IEEE SENSORS2017J. ASCORBE; J.M. CORRES; F.J. ARREGUI; I.R. MATIASAbstract Bragg gratings have been fabricated by means of sputtering on the end facet of standard multimode optical fibers towards development of refractometers. Tin oxide was selected as the coating...

Humidity sensor based on lossy mode resonances on an etched single mode fiber

Humidity sensor based on lossy mode resonances on an etched single mode fiber

2015 9th International Conference on Sensing Technology (ICST)2015J. ASCORBE; J.M. CORRES; I.R. MATÍAS; F.J. ARREGUIAbstract Here we present a new structure to fabricate optical fiber sensors. This structure consists on an etched single mode optical fiber coated with...

Choose category